How to Pair or Unpair Your Fan Remote ControlUpdated 6 hours ago

If you’ve purchased a replacement remote or need to reset your current one, follow these steps to pair or unpair it with your fan.

Step 1: Turn Off the Power

• If you have a wall switch: turn it off and leave it off for at least 10 seconds.

• If you don’t have a switch: flip the circuit breaker or unplug the fan (if possible) to completely cut power for 10 seconds.

Step 2: Turn the Power Back On & Pair the Remote

1. Turn the fan back on (restore power).

2. Within 10 seconds of powering on, press and hold:

   • FAN ON/OFF button (button #4)

   • LIGHT ON/OFF button (button #2)
     at the same time.

3. Listen for the beeps:

   • 1 beep = pairing complete.

   • 2 beeps = unpairing complete.

Step 3: If It Didn’t Work

• Repeat the process — timing is key!

• You can use one or two remotes to control one or two fans after pairing.